Log in
RegisterSuper Mini FTA DVB-S2 Satellite Receiver
Description
General information
General information
- Free to Air , Auto Scan/TP Scan/ Blind Scan
- Receiving Standard Definition and High Definition TV and Radio channels
- TV Recording over USB drives (PVR-ready)*
- High Speed searching program
- Number of channels: MAX 5000 memory store
- EPG: up to 7-days based on SI information Physical
- Specification
- Teletext supported, Support Favorites Group
- Energy saving, Standby mode less than 1W
- Multi-Languages Support, PAL & NTSC Auto conversion, FULL HD Receiver
- Media Player supporting MPEG2, MPEG4, MKV, AVI, FLV, JPEG, BMP, PNG, MP3, WMA ... ETC
- Software update over RS-232 Serial Port , By USB, By FTP from inside the receiver, from X2 Website
Satellite Front-End
- Modulation: Fully Compliant with DVB-S , DVB-S2 (MPEG4 , H.264)
- Input connector: F-connector LNB IN (KU/C BAND)
- Frequency range: 950-2150 MHz
- Symbol rate range: 2-90 MSPS
- Input level: - 25 to - 65 dBm
- LNB voltage: 13/18 V max 400 mA
- Tone control: 22 KHZ
- LNB Control: DiSEqC 1.0/1.2/1.3 USALS
- KU/C Band Supported
Video Decoding & Audio Decoding
- Audio Channel : Mute, Left, Right and Stereo , Joint Stereo
- Audio Decoding : MPEG-1 , MPEG-2 layer I and II & MPEG-4
- Video Resolution : High Definition & Standard Definition Rear panel Interfaces Input connector
- Satellite IF Input : F-type (LNB IN) , Loop Out
- 2 x Audio L/R (RCA)
- 1 x Video Signal (RCA)
- 1 x RS-232 (9-pin D-sub male)
- HDMI Port
- USB (PVR & WiFi Dongle supported) USB Hub
- Supported
- SPDIF
Front panel Interfaces
- Standby Power button, Menu, Ok, Volume up/down
- Channel up/down and menu navigation keys
- 4-character LED digits display
- 1 Standby LED Indicator
- 1 Signal LED Indicator
- IR Sensor
- CA "Multi CAS Card Reader"
Power Requirements
- Mains input voltage: 100V~250v
- Mains input frequency: 50 / 60 Hz
- Power consumption: Typ.: 8W MAX
Physical Specification
- Operating temperature: +5°C to +45°C
- Storage temperature: -20°C to +65°C
